Kitchen Faucet Installation Cost Factors

Installation Fee (Optional)

Shoddy handiwork can waste your hard-earned cash. If your plumbing skills are lacking, consider hiring a professional to install your new faucet.

Faucet installation fees vary but will probably fall somewhere in the $260 to $480 labor cost range. Added modifications to the sink will likely incur extra labor costs.

Faucet Prices

Faucet prices differ depending upon the brand. American Standard charges between about $60 and $540, while Moen faucets go for around $50 to $1000. Kohler so far has the most extensive range, starting from $30 and going all the way up to $2,400 per unit.

Touchless spray head faucets can usually run a bit more.  Whereas a single handle model is most like cheaper.  If you need a complicated filtration system, that will also increase the labor cost.

Tools and Materials

Answering the question of “How much does it cost t

Answering the question of “How much does it cost to install a kitchen faucet?” may not be so simple as a price tag.

The prices of the necessary tools and materials vary depending on where you purchase them. Some places sell basin wrenches for about $6 but be sure to consider quality when you shop.

The necessary supplies include:

  1. Basin Wrench
  2. Crescent Wrench
  3. Tape Measure
  4. Channel Lock Pliers
  5. Plumbers Putty or Silicone Caulk
  6. Plumbers Tape
  7. Faucet
  8. Flashlight (Optional)
  9. Supply Lines
  10. Bucket

Also, consider the time you will need to gather these supplies, replace the existing faucet, and clean up the mess. It all adds up.


DIY Faucet Installation

Handy homeowners can install a faucet DIY if it only involves removing the old faucet and installing a replacement. When upgrading to a new style faucet or one that needs more holes to be drilled, hiring a professional is often required.

The easiest kitchen faucets to install are ones with the spout and faucet handles combined into a single piece. For beginners, FaucetMATE sells a $17 connection kit, and Delta sells an EZ Anchor tool for easy faucet installation and removal.

Do You Need Plumbers Putty To Install A Faucet?

Faucets typically include a rubber or plastic gasket, or a trim ring, that goes over the faucet holes in the sink or countertop. Sometimes, plumbers putty or tape is used instead of a gasket to create watertight seals around a faucet.

Factors That Impact the Cost of the Faucet 

  • Flow Rate 

Something people often don’t think about with their kitchen faucet replacement is the flow rate of the new faucet. Essentially, flow rate refers to how fast or slow the water is coming out of your faucet and whether or not you can easily control the rate.

If you’re frequently running your water and filling pots and pans or washing dishes, it’s important to have a faucet with a fast flow rate. However, this added feature will also bump up the cost of your kitchen faucet. 

  • Lighting Features 

As with touchless faucets, faucets with lighting features are another top modern amenity. Lighting features, while being aesthetically pleasing, are also very practical.

Most light-up faucets change the watercolor from clear to blue to red to green, depending on the water temperature. Blue water means that the water is cold, red water means that the water is hot, and green water means lukewarm. 

Water that lights up is a great way to keep from accidentally burning your hand when you mistake hot water for cold. While it certainly isn’t necessary, it’s a nice bonus feature that will bump the price by an extra $100 to $1,000. 

  • Built-in Filtration

Depending on where you live and your water source might not have soft or clean water. Rather than buying a Brita water filter or installing a costly filtration system, you can opt for a faucet that has a built-in filter.

Faucets with built-in filters are extremely handy and don’t cost an outrageous amount like some other faucet features. Expect to pay between $40 and $140 for a built-in faucet filter. 

  • Integrated or Separate Sprayer 

Most modern kitchen faucets come with the sprayer included in the faucet head. However, if you’re replacing an older faucet and want to keep the sprayer portion separate from the head, it might cost you more.

Because of the extra materials and features, faucets with separate sprayers generally cost more than faucets with integrated ones. 

  • Damages and Installation Costs 

As with all construction projects, don’t be surprised if you run into unexpected problems while replacing your kitchen faucet. You may find that you need to replace the entire sink or that one of your valves or water lines is leaking.

No matter the problem, unexpected damages, and installation costs are killers, especially if you hire a professional plumber. They tend to upcharge you for change orders and unexpected problems. 

  • Material of the Faucet 

The material of your faucet is another important factor that affects pricing. Faucets made of copper, brass, or nickel are more expensive than faucets made of plastic or chrome. Oil-rubbed bronze has a black finish.

Here’s a table with the breakdown of how faucet material affects the overall price. 

Faucet Material Cost 
Chrome $40 – $1,500
Bronze $65 – $800
Plastic $80 – $500
Nickel $90 – $1,600
Stainless Steel $100 – $1,000
Brass $100 – $2,000
Zinc $150 – $800
Copper $175 – $1,000

As you can see, there’s a large disparity in kitchen faucet prices. While the margin pricing is high for each material, the minimum and maximum you might pay is a good indicator of the quality you’ll get from each material. 

Labor Cost to Install a Kitchen Faucet

Kitchen faucets can be installed by a plumber in 1 to 3 hours. Plumbers typically charge between $45 and $200 an hour, with most paying an average of $90 an hour. A new faucet installation of a monobloc faucet takes about an hour. Some replacements take 2 hours if the old faucet is difficult to remove or plumbing lines need to be replaced. If you need to rough plumb, run a line, or have a complex faucet installation, it may take up to 3 hours. This means the average labor rate for installing a faucet is $90 to $270, with most paying around $180 for the labor.

Cost to Install a Pot Filler

When adding a pot filler, you have a different set of installation concerns. If you do not already have a line run to the area behind the cooktop, one must be run at a cost of $70 to $140. The area needs to be roughed, the wall tiled, and then the plumber can come back and install the pot filler. This takes about 3 to 4 hours total, with an average total cost of $340 to $500 in labor for the installation, plus the cost of the pot filler of $200 to $1,200.

Find the best kitchen faucet installers near me

Cost To Replace Bathtub Faucet

The average cost to replace a bathtub faucet is $150 to $400 for labor only and between $300 and $750 for the faucet, materials, and installation. Prices depend on the location, complexity, type of faucet and materials, and if pipe widths need updating to match the new faucet.

 Cost To Replace Bathtub Faucet   Type Average Cos

Cost To Replace Bathtub Faucet
Type Average Cost
Tub Faucet $150 – $350
Installation Labor $150 – $400
Total Replacement Cost $300 – $750

Get free estimates from top-rated plumbers. View Pros

Bathtub Faucet Prices

Bathtub faucet prices range from $150 to $350 on average, without installation. Prices depend on the brand, material, mounting type, style, flow rate, handle type (cross, knob, or lever), and shape. Bathtub faucets kits typically include the shower faucet if applicable.

Bathtub Faucet Prices By Type
Type Price Range
Tub Deck Mount $100 – $1,000
Tub Wall Mount $80 – $600
Freestanding $200 – $1,000
Floor Mount $300 – $600

*Not including installation.

Brand also influences the cost of a bathtub faucet

Brand also influences the cost of a bathtub faucet.

Bathtub Faucet Prices By Brand
Brand Price Range
Delta $100 – $250
Moen $80 – $550
Kohler $80 – $1,200
Pfister $80 – $400
American Standard $200 – $550
Water Creation $100 – $300
Barclay Products $90 – $270
Glacier Bay $120 – $250
Kingston Brass $100 – $400
Pegasus $80 – $250
Grohe $200 – $1,500

*Not including installation.

Return to Top

Average Faucet Installation/ Replacement Cost

With the aforementioned factors in mind, the cost to replace a faucet costs an average of $120 to $300, including adjusting the water lines. Faucet prices alone are between $100 and $350, while the labor cost that you can expect from your plumber to replace a bathroom, bathtub, or kitchen faucet is between $45 and $150 an hour. Most plumbers usually charge for an hour or two.

You can also breakdown the cost to replace a faucet based on type – whether it’s a kitchen faucet, bathroom faucet, or bathtub faucet:

Type of FaucetAverage Cost to Install
Kitchen Faucet$120 to $250
Bathroom Faucet$120 to $350
Bathtub Faucet$150 to $400

Kitchen Faucet Maintenance

The maintenance for your kitchen faucet varies depending on its finish. Chrome, plastic, and stainless steel can generally be cleaned with anything. Other finishes require pH-neutral or special cleaners designed for that metal. PVD (physical vapor deposition) finish makes it easier to keep clean and eliminates hard-water build-up and corrosion. However, this means you must avoid using bleach. Always ask the manufacturer of your faucet for cleaning information.

Talk to local pros to get quotes for your kitchen faucet installation

Materials And Finishes

Most kitchen faucets feature a brass underbody, with ceramic or plastic pieces thrown in for good measure. Other materials and finishes can be used on the faucet’s exterior. Some have only a cosmetic influence, while others have an impact on the faucet’s longevity or cleaning ease:


There are three distinct neck or spout types available for kitchen faucets. The conventional neck rises a short distance from the base before straightening out. It may or may not have a spray head that can be pulled out.

For homeowners that have a lot of tall pots, the gooseneck is a popular choice. More items may be stored underneath the neck, and its reach, or swivel, is usually greater. It might also be equipped with a pull-down head.

In classic or farmhouse designs, the bridge is more attractive. It comprises of two pipes that connect in the middle at the spout, either reaching up from the deck or out from the wall. Bridge faucets come in a variety of shapes and sizes, but most have a Victorian neck that bends in two or three places.


One or two levers or handles may be used to operate your kitchen faucet. They can be installed next to the spout or on the same block as the spout. True levers, spokes, and discs are some of the types available.

Although this is primarily a personal preference, many persons with arthritis or difficulty using their hands may prefer the lever design. Your faucet might alternatively be touchless, with a button hidden in the sink cabinet’s toe kick that switches on the water.


A kitchen faucet can be found in one of two locations. In your countertop or sink, a deck-mounted faucet is fitted. It might be in the center or out to one side. Larger sinks may require a faucet in the center, whereas D-shaped sink basins function best with the faucet in the corner.

Wall-mounted faucets are fitted right behind your sink in the wall. They protrude from the wall and into the sink. Some feature a jointed spout that extends farther into a bigger sink, while others have a fixed and straight spout.


The size of a faucet varies greatly depending on the model. A monobloc faucet is a single-hole design with a faucet that extends 12 to 18 inches into the sink and is 12 to 18 inches tall.

The knobs on a broad faucet are 8 inches apart on the center, with the spout in the middle. It also reaches 12 to 18 inches into the sink and is 12 to 18 inches tall. Some faucets feature unique drillings, such as one with a single handle that rests on its own.

If you’re replacing a faucet, make sure the drillings match or choose a plate that covers the current counter drillings. Otherwise, the new counter may be drilled to suit the faucet of your choice.

Types of Kitchen Faucets

This brief overview of kitchen faucet options is designed to assist you in shopping for those that will integrate beautifully into your kitchen design. Make sure to view our kitchen sink prices if you’re looking to replace both the sink and the faucet together, you may just get a better deal. Kitchen faucet types are:

Standard kitchen faucets, for lack of a better term, are the faucets that don’t have any of the features that characterize those in the rest of the list. They remain the largest category of kitchen faucet. Standard faucets sit on or behind the back of the sink have either hot and cold handles emanating from the base or a single handle at the top of the main body of the faucet.

Pull down kitchen faucets and pull out kitchen faucets have heads that detach from the faucet neck. The head has a flexible hose attached that retreats into the faucet neck when the head is put back in place. Extra hose extends beneath the countertop and is often weighted to assist in the retreat. Many pull-down and pull-out faucets have adjustable water flow settings.    

Wall mount kitchen faucets require plumbing inside the wall, so they are disruptive and costly to install unless a complete remodel is underway. Some plumbers are reluctant to install a wall mount faucet on an outside wall in a very cold climate due to the risk of pipes freezing.

Bridge kitchen faucets are difficult to describe but easy to spot. They have separate hot water and cold water handles with piping running from left and right to form a bridge. The faucet neck extends up from the bridge.

Touchless kitchen faucets or hands-free faucets are so named because they have motion sensors that start and stop the flow of water. A variation is the tap-control or touch-on faucet that requires just a tap to turn water on and off. All these faucet types include a handle for manual control and temperature adjustment.

Vessel and waterfall faucets lack the functionality most homeowners want in the main kitchen sink though one can be a stylish addition to a prep sink. There are many styles of vessel and waterfall faucets, but in most the water flows out of the faucet or over a ledge without traveling through an aerator.

Warranty on faucet install

When you are choosing a plumber, ask them if they guarantee their work. There’s nothing worse than paying for a new install and having it break down a few weeks later. Most professional plumbers will provide this for no extra cost.

Other Factors to Consider 

  • Permit and Inspection Costs 

If you end up needing a permit and inspection for your kitchen faucet, your cost will increase substantially. Don’t be surprised if you end up spending $200 to $500 more than you expected for the permit and inspection fees. 

  • Extra Material Costs 

As previously mentioned, you might discover during your work that you have a plumbing issue to resolve when changing plumbing fixtures. New plumbing lines, couplings, valves, plumbers putty, Teflon tape, and plumbers caulk are all things the typical homeowner doesn’t plan on using when they start their faucet replacement. However, these necessities can cost an extra $10 to $100 depending on how many things you need. 

  • Finish Style 

Along with brand and faucet material, the finished style also plays a significant role in its price. Polished, satin/brushed, and antiquated are the most common finishing styles on upscale kitchen faucets. Each of these finishes can cost an extra $50 to several hundred or even thousand dollars. The finish often goes hand in hand with the material that you choose. 

Monthly Giveaway!

Do you like Free Products? If so, you’ll love to know that we give away a new item every now and then!

To enter, just head to our Facebook Page, click the Monthly Contests tab and enter the giveaway. Did we mention it’s free? Good luck!


Leave a Reply

Your email address will not be published.