Add a DIY Shower Enclosure for Privacy When Slipping out of Wet and Sandy Beachwear in Your Outdoor Shower Area

Leave salt, sand, wet swimsuit and unwanted audiences outside while you change comfortably in the privacy of your DIY outdoor shower enclosure. Two layers of slats maintain ventilation while obscuring the view from wandering eyes. Build this project from stock materials and mount it to an existing concrete shower area in an attractive design that won't test your comfort level.

Read More
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Step 10


Contrasting Material

The contrasting wood and stone material in this open outdoor shower by @reflective_gardens makes a stunning impact. The shiny brass shower head pops against the dark wood stain. When planning your outdoor shower, don’t be afraid to experiment with different finishes and unexpected combinations.

6. Easy Outdoor Shower Building Plan

Corrugated galvanized metal panels are inexpensive

Corrugated galvanized metal panels are inexpensive, and rust resistant. Bolted to wood frames, they make great looking shower enclosures. There is also a great detailed tutorial on simple plumbing! ( Source )

3. This cute, eco-friendly off grid shower at Channel Rock, Ca

Have you ever wanted your own treehouse, but feel

Have you ever wanted your own treehouse, but feel like you’ve just gotten too old to get away with it? This thermosiphon shower doesn’t look far-off in terms of design. Housed within a wooden shack is an off grid shower that uses two different types of heating to warm up your water supply. 

Am embedded water storage tank takes heat directly from the sun’s energy, while a thermosiphon-based heater uses a more complicated process based on convection. A solar panel heats the water in the storage tank, which rises against gravity into an insulated tank. It’s a clever alternative to electricity and insulated enough that you should still be able to bask under a hot shower when the sun’s hiding behind the clouds.

When to Build Your Outdoor Shower

As might be expected, building an outdoor shower involves an extensive amount of outdoor time. So, in the interest of comfort, you may want to wait until warmer months before building. But plumbing an outdoor shower does involve some indoor work, too, and this can be done at any time of the year. Working on the indoor part during cold months is a good way to get a head start on the project for spring.

Choose Copper

A copper shower fixture like this one, created by @peninsulawideplumbing, is a smart choice for an outdoor shower for several reasons. Copper is durable and easy to work with. And from a design point of view, it only gets better with time thanks to the natural patina it develops.

Step 3

Install the shower. Dig a 12″ deep hole with a post hole digger, and insert the 8′ 4″ × 4″. You can use concrete to secure it, or just fill the hole with dirt. Place the shower base next to the upright 4″× 4″, mark its location, then remove the base and cover the ground with pea gravel or small stones to help with drainage. Place the base on top of the gravel.

12. Attractive garden shower designs

Take inspirations from spa designs and add accesso

Take inspirations from spa designs and add accessories such as plants and towel hangers to make your garden shower a little sanctuary. ( Source: 12 )


  • Most outdoor shower plans need to be adapted to your specific location and geography, so feel free to play with the plans listed here to find what works for you.

    Thanks! Helpful 5 Not Helpful 1

Submit a Tip
All tip submissions are carefully reviewed before being published

Thanks for submitting a tip for review!


Protect your shower in the winter

Not many people remember this, but your outdoor shower will be exposed to the winter months when not in use. This means you will need to protect it from cold temperatures, depending on your location. The most important thing to do is make sure your shower is completely drained of water to prevent freezing and cracking to the supply hoses and shower fixtures. If you bought a freestanding shower, things are easy for you. Simply remove the garden hose and put away the shower for the winter.

If your shower valve is installed on the wall and connected to a heater, turn off the water supply, put away the hose, and open the shower valves and leave them open. Also, make sure to remove the showerhead and valve from the faucet so that any residual moisture can escape.

The actual shower enclosure will also need to be protected during the winter. When you are ready to close the shower for the season, thoroughly dry the inside and cover the enclosure with a tarp, making sure the tarp is tied securely. If you did not build an enclosure, then cover the shower pipes.

9. DIY weed sprayer shower by Livin Lightly

Perhaps the most minimalist and true off grid show

Perhaps the most minimalist and true off grid shower we’ve seen yet, this idea by Livin’ Lightly is little more than a weed sprayer and shower hosing kit. There’s no shower pump, no electricity, and no propane. You’ll have to heat the water yourself and you won’t get an overly-long shower out of it, but you will be able to use it literally anywhere. 

With a few components you can pick up in most hardware stores, you’ll soon be taking hot showers anywhere that you can park up and start a campfire. Just remember to buy yourself a new tank; there’s no telling whether any chemical residue might be lingering in a retired sprayer. Now you’ll be spraying those weeds in no time and at little cost, and when we say weeds we of course mean the kids.


Leave a Reply

Your email address will not be published. Required fields are marked *