travertine pavers

Travertine is a beautiful natural stone option for your driveway. Travertine Pavers are up to 3x stronger than brick pavers, however, this only remains truly accurate in driveway applications when you stick with the smaller sizes – 4×8 or 6×12. One large paver bearing the weight of your vehicle has a much higher probability of cracking than several smaller pavers sharing the same weight load. Visually stunning colors that range from serenely elegant to purely playful, combined with multiple pattern options, make Travertine Pavers a natural leader in driveway hardscape applications. 


5. Install the Pavers Along the Driveway Edge

Lay the first row of pavers along the driveway edge, leaving the same amount of distance between the driveway and the pavers as you plan to leave between the pavers themselves. Take care not to press the pavers into the sand, because this will result in an uneven walkway. Simply lay the pavers onto the sand.

Tools you’ll need for a thorough cleaning BEFORE you seal

Third, what type of materials will you need? You will need a pressure washer, a surface cleaner, which is an attachment to the pressure washer made to clean flat surfaces. You’ll need some type of cleaner, whether you use chlorine to kill mold, or do you use a product like Cobble Prep or Cobble Clean by Surface Logix, et cetera. There’s a lot of different cleaners that you can use because these bricks need to be thoroughly cleaned before you seal them. You’re going to need a broom. You’re gonna wanna to clean up loose sand debris, et cetera.

Cost of Brick Driveways

Bricks are manufactured by baking them under a very high temperature for more than 24 hours. The result is an invincible building material that can be laid down to be an elegant and durable driveway. These benefits will surely overshadow the cost.Compared to asphalt and concrete pavements, brick paver driveways will cost you more. When building a driveway, you might need not only hundreds but thousands of brick pavers. Each piece costs anywhere from as low as $0.50 to as much as $3. That means spending at least $10 per sq/ft. On the other hand, concrete pavement costs around $3 to $12 per sq/ft, and asphalt driveways may cost the homeowner from $1 to $3 per sq/ft.The cost of brick driveways is not the most expensive on the market; natural stone pavers, like cobble stones, can cost $5 a piece. That's $60 per sq/ft. While this is costlier, natural stones are also more impressive for their durability and beauty characteristics.Natural stones, asphalt, and concrete are common materials for driveways. However, bricks are also ideal, especially for those who want a more classic look, without spending as much as when using natural stones.

Steps on How to Install a Permeable Paver Driveway

1. Test the Soil and Excavate

Photo by William Wright

First, call 811 for an underground utilities check. Next, do a percolation test to see how fast the soil absorbs water. (Contact your local Cooperative Extension office for details.) Remove the existing pavement, and dig to a minimum depth of 15 inches, unless the perc rate is less than 0.52 inches per hour. In that case, you may need a deeper base or drainage pipe.

2. Prepare the Stone Base Layers

Photo by William Wright

Cover the excavation with a 6-inch layer of ¾- to 2-inch washed crushed stone, which has sharp edges that knit together. (River gravel, with its rounded profile, is unacceptable.) Go over it twice with a plate compactor, across and lengthwise. Top with one 4-inch layer of ¼- to 1½-inch washed crushed stone, and compact that twice, too.

3. Screed the Bedding Layer

Photo by William Wright

Install a concrete or hard-plastic edging to keep the pavers from shifting. Then, starting from one corner, lay two 2-inch-diameter steel pipes about 6 feet apart and parallel on the compacted base. Cover them with ¼-inch stone, then pull a 2×4 screed board over the pipes to create a flat bed for setting the pavers. Lift out the pipes, fill the gaps, and repeat across the remaining area.5.

4. Place the Layers

Photo by William Wright

Starting at the lowest corner, set the pavers on the bedding layer, tight to the edging and one another. (Nibs on the sides of the pavers automatically create the drainage gaps.) Check every 6 to 10 feet to make sure the pavers are square to the first row. Place all the full-size pieces, then go back and cut pieces to fit in any gaps along the edges.

5. Fill the Joints

Photo by William Wright

Once the pavers are in, sprinkle ¼-inch stone, the same used in Step 3, on the surface, and sweep it into the gaps with a wide push broom. Push the broom diagonally across the grid so that you don’t dislodge any stones already in the joints.

6. Tamp

Photo by William Wright

Sweep the surface clean, then run a plate compactor diagonally over the entire driveway. The machine’s vibrations pack the pavers firmly into the bedding layer and lock them in place. Refill joints that have settled deeply, and compact again. Now your driveway is open for business, rain or shine.


Brick pavers make for a very attractive classic paving surface that can work well with almost any home style. Brick paving is a far more attractive paving surface than poured concrete, but when compared to concrete pavers, the design options are more limited. Brick pavers can be arranged in different patterns, but the sizes are all rectangular, and colors are limited to browns and reds. Concrete pavers, on the other hand, come in a wide variety of shapes and sizes, giving you more flexibility.

How Are Brick Driveways Made?

The first step in laying a brick driveway is to prepare the area. Existing structures or hardscapes must be demolished, and weeds, grass or other landscaping must be removed. The area must be excavated to the proper depth, graded to create a two-percent slope for drainage, and tamped to compact the sub-base.

It is generally recommended to install a geotextile fabric before laying and compacting road base. Bedding sand is then poured and levelled over the compacted base. Brick pavers are then laid in the desired pattern and cut to fit as necessary. Although the majority of the bricks are set in sand, the border is set in concrete or mortar to establish a sturdy edge.

Joint sand is then poured over the brick driveway and tamped down. The driveway is swept and watered and may be sealed to finish the process.

Now it’s time to seal

You’re gonna wanna mix and apply the sealer based on manufacturer’s recommendations. I mean, in the years that we’ve been in business, we have used a ton of different sealers. All of them are mixed, slightly different. So follow manufacturer recommendations to get the best results. You would want to apply to sealer with a sprayer, being sure that sealer penetrates into the sand joints to stabilize the sand. This is very important if you wanted to sand your joints and have actually groomed it in. But it’s also important, even if you didn’t, because they’re still sand in those joints from when the pavers were installed and you want that sealer to stabilize that sand so it doesn’t wash out quite so easily. You wanna let it dry for a short time and then apply another coat. Be sure to use a spray shield when necessary and apply nice even coats being careful not to walk in the sealer. Depending on the product you use, how thick you put it on, how you mix it, walking in it could leave footprints. And believe me, we know from experience. It happens periodically. It can be fixed. But you want to save yourself that headache and try not to walk through the sealer that you’ve just sprayed. Now you want to use a roller to back-roll, any puddled sealer that did not penetrate into the brick or into the joints. You’ll wanna make sure there’s a nice even coat. Let it soak for a few minutes because it may penetrate. But what doesn’t penetrate use a back roller to get that puddled sealer.

Step 6

Add 1 inch of sand above the gravel and sand fill. Use a 2-by-4-inch board, held with the narrow edge against the sand, to saw back and forth over the sand base, evening the sand out and compressing it. Use the metal stake to check the depth. The gravel and sand together should now be 5 inches.

Pour and spread the sand and gravel fill until it is 4 inches deep. Mark a metal stake at 4 inches, and push it into the gravel and sand fill to determine the depth.

Brick Pavers vs. Concrete Pavers

Brick pavers are a classic building material that lends a timeless look to your landscape. But they are slightly more expensive than concrete pavers and offer fewer design options. And while the bricks themselves are very durable, the surface requires periodic sealing to prevent stains. Finally, both clay bricks and concrete pavers are susceptible to cracking and bricks can become loose over time causing an uneven surface.

Best Driveway Materials

Bricks are not created equal. Substandard materials can jeopardize the quality of the work. That's why we source our materials only from the most reliable and trusted suppliers of brick driveway pavers in the country.With their magnificent bricks and our impressive craftsmanship, you'll get nothing but a perfect brick driveway that's well worth every dollar spent.Contact us for a free estimate on your next paver or hardscape project:

Solutions to Issues with Brick Driveways

1. Weeds growing between bricks

If you are concerned about weeds growing up through the bricks in your driveway, make sure to include geotextile fabric in the installation process. You can also pull weeds individually as they grow through, spray them with a store-bought herbicide, or use one of these 17 ways to naturally kill weeds.

2. Limited color choices

If the limited color choices of natural brick pavers are making you question your plan for a brick driveway, you might want to consider concrete brick pavers. You can get the traditional look you want with rectangular pavers that look like bricks but are available in a wider range of colors.

3. Looking for an eco-friendly solution

Natural clay bricks are made with natural materials and are considered an eco-friendly hardscape option. However, if you are looking for an even greener choice, source salvaged bricks to reuse for your project. You may find that salvaged bricks cost more than new bricks. This is due to the labor involved in cleaning them up for resale.

4. Cracking and breaking over time

Natural brick pavers are more likely to crack or break than concrete pavers. So, if you are interested in a brick driveway but are concerned about damage over time, there are a couple of things to consider. The first thing to consider is that although your bricks are more likely to chip, crack and shear over time, they will wear well overall, can last for generations, and you might actually like the rustic charm that weathering reveals.

However, if you would prefer an option that is less likely to break or chip or is at least easier to repair if damage does occur, consider interlocking concrete brick pavers for your driveway design. Interlocking pavers go together like a zipper, which means they can be more easily taken apart and put back together if you need to replace one or two damaged pavers.

Sign up for the Newsletter

Get the latest This Old House news, trusted tips, tricks, and DIY Smarts projects from our experts–straight to your inbox.


Leave a Reply

Your email address will not be published. Required fields are marked *